1 9

AR15

Cheek Riser for A2 Stock

Cheek Riser for A2 Stock

$60.00 USD
$60.00 USD
Sale Sold out
Shipping calculated at checkout.
Color: PETG-CF: Black

- Get Your LARP On: Inspired by the cheek risers used by high-speed guys in the 80’s and 90’s. The paper and steel targets at the range will appreciate your range-day drip.

- Color and Stock Options: Available in Black, Earth Brown, and Forest Green.

- Secure Installation: The stock must be off the buffer tube and with sling swivel removed. Once this is done, slide the riser on the stock from the front and reinstall the sling swivel. Insert the included installation hardware into the front hole first and tighten it until you feel a small amount of resistance. Then insert the other set of hardware into the rear hole and tighten it down until it feels firm. Do not overtighten. Tighten the front hardware the rest of the way. Finally, reinstall the stock onto the buffer tube.

- Sight Compatibility: The height of these risers will make the iron sights unusable. They are intended for use with an optic on top of a carry handle, or otherwise raised optics.

- Original Design: 2200+ products designed and 3D printed in the heart of America in St Louis, Missouri by Hammy3DPrints.

 

MATERIAL: 3D printed using PETG-CF filament.

WARRANTY: If this item breaks I will make any design adjustments, if needed, and send a replacement for free.

Made in USA.

Please note that the products may have slight imperfections as 3D Printing is rarely perfect. The exact product you receive may also slightly vary from the product photos as I iterate and improve upon designs based on user feedback.

Materials

FDM 3D-Printed with PLA+ or PETG-CF filament (unless otherwise specified). The item description should contain the material type.

Shipping & Returns

Most items ship within 1-4 business days. Larger orders may take longer to ship.

$5 flat USPS shipping. Orders over $50 ship free. UPS shipping also available.

Returns accepted within 30 days.

Warranty

If an item breaks, reach out to me at hammy3dprints@gmail.com with your order number and pictures and I will get a replacement or refund sent to you ASAP.

View full details

Customer Reviews

Based on 3 reviews
100%
(3)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
H
H.
Great Cheek Riser!

This cheek riser designed perfectly for the fixed A2 style butt stock. The material the cheek riser made out of feels strong and not cheap plastic. It fits like a glove and no wiggle whatsoever. Great Job Hammy!!

User picture User picture
M
Michael B.
A2 Cheek Riser

I needed a cheek riser for one of my older AR15's to use with a Steiner P4Xi scope mounted to the "carry handle". This does the job nicely with a picatinny rail attached to the handle. Height is correct for proper eye alignment. I was a little curious if the PETG-CF filament would be rugged enough but it seems fine. The only issue I had installing it was the riser is fairly stiff and the screws were not quite long enough to allow them to grab the nuts and draw the riser up tight. I just put a C-clamp on the riser to close the gap enough to get the screws to grab and everything tightened up correctly. I can recommend this item.

D
Dammon W.
Great

This is a great made product. It fit perfectly and make the stock look good. This was a great find and was the last thing to make my old school build. Also thank you for the red starbrust!