Skip to product information
1 of 12

AR All

AR 15 Buffer Tube Mount - Slatwall | Rifle Holder Storage Rack

AR 15 Buffer Tube Mount - Slatwall | Rifle Holder Storage Rack

Regular price $20.00 USD
Regular price Sale price $20.00 USD
Sale Sold out
Shipping calculated at checkout.
Primary color
Style

- Latchless Ambidextrous Design: Retrieve firearm with a single upward and outward motion. Firearm is securely held in place by gravity and cut-outs in the mount, safe from accidental bumps. Firearm can be mounted in either direction.

- Allows Magazine To Stay In Firearm: Be ready at a moment's notice. Unlike the vast majority of mounts, this leaves the mag well open for a magazine to stay inserted.

- Extremely Compatible: Works with mil-spec and commercial buffer tubes. Works for AR9, AR10, AR15, or any other firearm with a carbine buffer tube.

- Offset Light and Red Dot Compatible: The extended version increases the distance between the wall and firearm from 1.8" to 2.7" to accommodate offset lights, red dots, lasers, etc.

- Simple, Secure Mounting: Attaches to Slatwall via hook on the back of the mount and included printed T-nut and screw on bottom of mount. Insert printed nut into Slatwall slot underneath where you will place the hooked part of the mount. Rotate the nut 90 degrees to lock it into place. Then hook the mount into place and insert the screw through the bottom hole and into the printed nut. Tighten the screw to secure the mount to the slatwall.

- Wide Slatwall Compatibility: Variations available for Hold Up Displays, Savior Equipment, StoreWall, Patrick Industries / Decorative Dynamics "Slotwall", Menards Slatwall (specify with or without metal track insert), and generic Slatwall (blue, green, and red dimensions in the images below).

If you don't know your Slatwall type, order this bundle to test: https://hammy3dprints.com/products/slatwall-test-fitment-bundle-slatwall-magazine-holder-storage-rack


- Original, Innovative Design: Support the original designer of the mount, Hammy3DPrints, rather than the lower-quality knock-offs. Designed and 3D printed in the heart of America in St Louis, Missouri.



NOTE: If you are using the shortened CMMG banshee buffer tube, please select the CMMG banshee option. If you are using a pistol buffer tube, such as what the Shockwave blade uses, choose the Pistol Tube option.


NOTE: The Skinny - Metal version is too thin to use the nut and will instead be friction fit on the bottom.

Disclaimer: This product is not manufactured, authorized, endorsed, or warranted by Hold Up Displays or Savior Equipment or Menards® or StoreWALL. It is solely designed and produced by Hammy3DPrints.


MATERIAL: 3D printed using PLA+ filament.

INSTALLATION: Attaches to Slatwall via hook on the back of the mount and included printed T-nut and screw on bottom of mount.

WARRANTY: If this item breaks I will make any design adjustments, if needed, and send a replacement for free.

Made in USA.

Please note that the products may have slight imperfections as 3D Printing is rarely perfect. The exact product you receive may also slightly vary from the product photos as I iterate and improve upon designs based on user feedback.

Materials

FDM 3D-Printed with PLA+ filament (unless otherwise specified).

Shipping & Returns

Most items ship within 1-3 business days. Larger orders may take longer to ship.

$5 flat shipping. Orders over $50 ship free.

Returns accept within 30 days.

Warranty

If the item breaks for any reason, reach out to me at hammy3dprints@gmail.com and I well get a replacement or refund sent to you ASAP.

View full details