AR 15 Buffer Tube Mount - Wall | Rifle Holder Storage Rack

Nearly 2000 mounts for various panel types can be found here for rifles, here for pistols, and here for magazines

- Latchless Ambidextrous Design: Retrieve firearm with a single upward and outward motion. Firearm is securely held in place by gravity and cut-outs in the mount, safe from accidental bumps. Firearm can be mounted in either direction.

- Allows Magazine To Stay In Firearm: Be ready at a moment's notice. Unlike the vast majority of mounts, this leaves the mag well open for a magazine to stay inserted.

- Extremely Compatible: Works with mil-spec and commercial buffer tubes. Works for AR9, AR10, AR15, or any other firearm with a carbine buffer tube.

- Offset Light and Red Dot Compatible: The extended version increases the distance between the wall and firearm from 1.8" to 2.7" to accommodate offset lights, red dots, lasers, etc.

- Durable, Dependable Design: Mounts to walls and securely holds the heaviest rifles without budging. Comes with self-tapping stud screws, or standard screws with drywall anchors depending on the selected option.

- Original, Innovative Design: Support the original designer of the mount, Hammy3DPrints, rather than the lower-quality knock-offs. Designed and 3D printed in the heart of America in St Louis, Missouri.



The "Mini" version shortens the mount by lowering one of the screw holes into the middle of the mount and removing the bottom screw hole. It also shrinks the width of the mount and moves the top two screw holes closer together so they can both fit on a single wall stud.

Perfect for organizing your gun room, or making your AR easier to access! This is specifically designed for mounting next to your bed for an easy-to-access self-defense weapon that can be mounted out of the reach of children.

NOTE: If you are using the shortened CMMG banshee buffer tube, please select the CMMG banshee option. If you are using a pistol buffer tube, such as what the Shockwave blade uses, choose the Pistol Tube option.

MATERIAL: 3D printed using PLA+ filament. Note that this filament is not a high-temp filament rated for use inside vehicles left in direct sunlight during summer. If you require a higher-temp filament please contact me.

INSTALLATION: Mounts to wall stud using included #8 x 1.5" self-tapping screws, or standard screws with drywall anchors depending on the selected option. FOR YOUR SAFETY, UNDER NO CIRCUMSTANCES SHOULD A LOADED FIREARM BE MOUNTED.

WARRANTY: If this item breaks I will make any design adjustments, if needed, and send a replacement for free.

Made in USA.

Please note that the products may have slight imperfections as 3D Printing is rarely perfect. The exact product you receive may also slightly vary from the product photos as I iterate and improve upon designs based on user feedback.