Cheek Riser Slim Version for B5 Bravo Stock | Multiple Colors Available

Versions with overhang like the old Cherokee risers are available here

A version for the Enhanced SOPMOD is here

Bag riders for this stock are here

- Height Options: Available in different heights: .250" or .500" or  .750" or 1"

- Style Options: The Standard version has a circular nub that clicks into the hole on the top of the stock. It sits further forward and requires the stock to be extended a few positions to fully pull the charging handle back when used on an AR. The Back / Short "S" version has two tabs on the rear that lock into the openings on each side at the rear of the stock. This version sits further back and is shorter, so that the charging handle on an AR can be fully pulled back with the stock fully collapsed.

- Color Options: Available in Black, Earth Brown, and Forest Green.

- Battery Storage for 1" Standard Version: The 1" standard version includes a storage tube in the riser that fits two (2) CR123/A batteries and comes with a sleeve to snugly fit them. The cap applies light pressure to the batteries to hold them in place. If there is any rattling, tighten the rear cap. The diameter is also such that it will snugly fit 18650 batteries. As 18650 batteries differ in length depending on the specific model, and if they're protected or unprotected versions, you will need to fill in the extra depth with something pliable.

- Battery Storage for 1" Back / Short Version: The 1" Back / Short version includes a storage tube in the riser that fits one CR123/A battery. The cap applies light pressure to the batteries to hold it in place. If there is any rattling, tighten the rear cap.

- Secure Fit: Wings on the side snap over the sides of the stock, and the circular nub on the inside of the riser seats into the hole on the top of the stock. If needed, you can tap the riser into place with a rubber mallet to get the circular nub and hole on stock to line up. This dual interface system ensures a tight fit without forward-to-rear movement. To remove, push up firmly on the overhang wing portion on one side - it will take some muscle.

- Sight Compatibility: The taller versions of these risers will make the iron sights unusable. They are intended for use with an optic with a 1/3 co-witness or higher optic.

- Charging Handle Compatibility: The stock will need to be extended a few positions for an AR charging handle to be pulled back

- Original Design: 2200+ products designed and 3D printed in the heart of America in St Louis, Missouri by Hammy3DPrints.

Disclaimer: This product is not manufactured, authorized, endorsed, or warranted by B5 Systems. It is solely designed and produced by Hammy3DPrints.

MATERIAL: 3D printed using PETG-CF filament.

WARRANTY: If this item breaks I will make any design adjustments, if needed, and send a replacement for free.

Made in USA.

Please note that the products may have slight imperfections as 3D Printing is rarely perfect. The exact product you receive may also slightly vary from the product photos as I iterate and improve upon designs based on user feedback.