- Simple, Secure Mounting: Attaches to Slatwall via hook on the back of the mount and included printed T-nut and screw on bottom of mount. Insert printed nut into Slatwall slot underneath where you will place the hooked part of the mount. Rotate the nut 90 degrees to lock it into place. Then hook the mount into place and insert the screw through the bottom hole and into the printed nut. Tighten the screw to secure the mount to the slatwall. Pistol, spare barrel, silencer, etc. slides onto barrel rod with embedded screw to support pistol with ease.
- Multiple Versions: Choose from different angles, calibers, and colors.
- Wide Slatwall Compatibility: Variations available for Hold Up Displays, Savior Equipment, StoreWall, Patrick Industries / Decorative Dynamics "Slotwall", Menards Slatwall (specify with or without metal track insert), and generic Slatwall (blue, green, and red dimensions in the images below).
If you don't know your Slatwall type, order this bundle to test: https://hammy3dprints.com/products/slatwall-test-fitment-bundle-slatwall-magazine-holder-storage-rack
- Angle Options: Available in different angles. Angled Right, Angled Left, Horizontal Right, Horizontal Left, Out, Vertical.
- Caliber Compatibility: Available for a wide variety of calibers. If your specific caliber isn't listed, choose the caliber one size down. The barrel rod is 2", if your barrel is shorter leave an order note.
- Original, Innovative Design: Designed and 3D printed in the heart of America in St Louis, Missouri.
If you wish to mount a pistol with a silencer attached, you must also purchase a "SUPPORT PIECE" from the dropdown as this adds a second point of contact to help support the pistol.
Note that the .22/5.7x28 rods MUST use a support piece if angled along the wall. They are not available out from wall.
NOTE: The Skinny - Metal version is too thin to use the nut and will instead be friction fit on the bottom.
Disclaimer: This product is not manufactured, authorized, endorsed, or warranted by Hold Up Displays or Savior Equipment or Menards® or StoreWALL. It is solely designed and produced by Hammy3DPrints.
MATERIAL: 3D printed using PLA+ filament.
INSTALLATION: Attaches to Slatwall via hook on the back of the mount and included printed T-nut and screw on bottom of mount. FOR YOUR SAFETY, UNDER NO CIRCUMSTANCES SHOULD A LOADED FIREARM BE MOUNTED.
WARRANTY: If this item breaks I will make any design adjustments, if needed, and send a replacement for free.
Made in USA.
Please note that the products may have slight imperfections as 3D Printing is rarely perfect. The exact product you receive may also slightly vary from the product photos as I iterate and improve upon designs based on user feedback.
