- Simple, Secure Mounting: Attaches to pegboard via hooks on the back of the mount. Heavy-duty mount holds firearm with ease.
- Wide Pegboard Compatibility: Variations available for Non-Metal Pegboard (composite, wood, plastic, etc.), Wall Control / Gun Pegboard, Heavyweight Diamond Plate Steel Pegboard, IKEA Skadis, Vaultek, Secure Wall, Squarelok, and Peglock.
- Low Profile, Sleek Design: Proudly display your collection and make your pistol easy to access. The mount sits flush with the pegboard and holds the firearm for easy retrieval.
- Perfect Fit: Works with double-stack 9mm / .40 / .357 Glocks, including Glock 17 / 19 / 22 / 23 / 24 / 26 / 27 / 31 / 32 / 33 / 34 / 35 / 45. Also works with Marui airsoft Glocks, though it may be a bit tight and require some filing to shorten the mount front to back. This mount does not latch onto the mag catch, so the firearm can be lifted on and off without activating it, while still being held secure.
- Original, Innovative Design: 2200+ products designed and 3D printed in the heart of America in St Louis, Missouri by Hammy3DPrints.
Tested on a Glock 19 Gen 3 and Gen 4 frame, as well as a Mac 11 frame specifically. Should work on other double stack 9mm/40/357 Glock models, as well as firearms that work with glock mags such as AR9s. If your firearm doesn't fit, let me know and I will work with you to get a version that does work.
The non-metal and metal pegboard designs are based around standard pegboard with 1/4" holes spaced 1" apart.
Note: The mount has been updated to a sleeker and slimmer design for all pegboards! Skadis and Vaultek versions will still be slightly wider due to the horizontal spacing between pegs.
NOTE: Wall Control in particular is troublesome to get the mounts that use metal hooks lined up properly. It will require some finagling, and may require filing or entirely snipping off the printed pegs/nubs on the back of the mount. This will not affect the structural integrity of the mount. The mount will be more susceptible to falling off when the rifle is removed and upward pressure is applied to the mount. This is a shortcoming of standard 1/4" pegboard.
Disclaimer: This product is not manufactured, authorized, endorsed, or warranted by Wall Control or Gun Pegboard or IKEA or Vaultek or Lockdown or Peglock. It is solely designed and produced by Hammy3DPrints.
MATERIAL: 3D printed using PLA+ filament. Note that this filament is not a high-temp filament rated for use inside vehicles left in direct sunlight during summer. If you require a higher-temp filament please contact me.
INSTALLATION: Mounts to pegboard. FOR YOUR SAFETY, UNDER NO CIRCUMSTANCES SHOULD A LOADED FIREARM BE MOUNTED.
WARRANTY: If this item breaks I will make any design adjustments, if needed, and send a replacement for free.
Made in USA.
Please note that the products may have slight imperfections as 3D Printing is rarely perfect. The exact product you receive may also slightly vary from the product photos as I iterate and improve upon designs based on user feedback.
DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
