Picatinny Rail Gun Mount - Pegboard / IKEA Skadis / Wall Control / Vau

- Simple, Secure Design: Simply slide the end of a picatinny rail into the mount. Engages with 7 picatinny slots, or 4 slots with the "pistol" version. For a version that latches onto picatinny anywhere along the rail, see here: https://hammy3dprints.com/products/vertical-gun-pegboard-mount-via-picatinny-rail

- Wide Pegboard Compatibility: Variations available for Non-Metal Pegboard (composite, wood, plastic, etc.), Wall Control / Gun Pegboard, Heavyweight Diamond Plate Steel Pegboard, IKEA Skadis, Vaultek, Secure Wall, Squarelok, and Peglock.

- Allows Magazine To Stay In Firearm: Be ready at a moment's notice. Unlike the vast majority of mounts, this leaves the mag well open for a magazine to stay inserted.

- Extremely Compatible: Available straight out, with the picatinny slot on the left of the mount, or with the slot on the right side of the mount. Also available in different lengths to accommodate optics, lights, and other accessories.

- Original, Innovative Design: 2000+ products designed and 3D printed in the heart of America in St Louis, Missouri by Hammy3DPrints.

The non-metal and metal pegboard designs are based around standard pegboard with 1/4" holes spaced 1" apart. NOTE: Wall Control in particular is troublesome to get the mounts that use metal hooks lined up properly. It will require some finagling, and may require filing or entirely snipping off the printed pegs/nubs on the back of the mount. This will not affect the structural integrity of the mount. The mount will be more susceptible to falling off when the rifle is removed and upward pressure is applied to the mount. This is a shortcoming of standard 1/4" pegboard.

NOTE: The paracord color will always be black.

NOTE: The left side of this print is where the supports attach during printing, so that side will always look a bit ugly - as pictured in the 5th photo.

Disclaimer: This product is not manufactured, authorized, endorsed, or warranted by Wall Control or Gun Pegboard or IKEA or Vaultek or Lockdown or Peglock. It is solely designed and produced by Hammy3DPrints.

MATERIAL: 3D printed using PLA+ filament. Note that this filament is not a high-temp filament rated for use inside vehicles left in direct sunlight during summer. If you require a higher-temp filament please contact me.

INSTALLATION: Mounts to pegboard. FOR YOUR SAFETY, UNDER NO CIRCUMSTANCES SHOULD A LOADED FIREARM BE MOUNTED.

WARRANTY: If this item breaks I will make any design adjustments, if needed, and send a replacement for free.

Made in USA.

Please note that the products may have slight imperfections as 3D Printing is rarely perfect. The exact product you receive may also slightly vary from the product photos as I iterate and improve upon designs based on user feedback.